IBM Books

MRS V3.4 Protocol Reference V2


Index

A B C D E F G H I J L M N O P R S T U V W
A
  • access-control
  • IPv6 monitoring command (2023)
  • accounting and node statistics (1522)
  • activate
  • APPN monitoring command (1604)
  • activate_new_config
  • APPN configuration command (1595)
  • add
  • AppleTalk Phase 2 configuration command (1655)
  • APPN configuration command (1575)
  • IPv6 configuration command (1991)
  • IPv6 update packet filter configuration command (2009)
  • NDP configuration command (2065)
  • OSI configuration command (1878)
  • RIP6 configuration command (2156)
  • VINES configuration command (1694)
  • Address Resolution Protocol (ARP)
  • VINES (1689)
  • addresses
  • OSI/DECnet V monitoring command (1896)
  • aping
  • APPN monitoring command (1606)
  • AppleTalk Control Protocol
  • for PPP (1643)
  • AppleTalk Phase 2
  • basic configuration procedures (1639), (1646)
  • configuring (1638)
  • monitoring (1649)
  • network parameters (1641), (1647)
  • router parameters (1640)
  • AppleTalk Phase 2 configuration commands
  • add (1654)
  • delete (1656)
  • disable (1658)
  • enable (1660)
  • list (1662)
  • set (1664)
  • AppleTalk Phase 2 monitoring commands
  • atecho (1666)
  • cache (1668)
  • clear counters (1670)
  • counters (1671)
  • dump (1673)
  • interface (1675)
  • APPN (1550)
  • monitoring (1598)
  • APPN (DLSw) (1502)
  • APPN configuration commands
  • activate_new_config (1594)
  • add (1574)
  • delete (1590)
  • enable/disable (1567)
  • list (1592)
  • set (1570)
  • TN3270 (1566)
  • APPN dynamic reconfiguration (1637)
  • APPN Frame Relay BAN Connection Network (1528), (1583), (1584)
  • APPN monitoring commands
  • accessing (1600)
  • activate (1603)
  • aping (1605)
  • deactivate link (1607)
  • dump (1609)
  • list (1611)
  • log (1613)
  • memory (1615)
  • restart (1623)
  • rtp status (1617)
  • rtp switchpath (1619)
  • rtp test (1621)
  • stop (1625)
  • summary (1602)
  • tn3270e (1627), (1629)
  • atecho
  • AppleTalk Phase 2 monitoring command (1667)
  • ATM
  • APPN using (1542)
  • ATM LAN Emulation
  • configuring DNA IV (1730)
  • B
  • before you configure (1514)
  • BGP monitoring commands
  • destinations
  • received (2234)
  • BGP6 configuration commands (2187), (2193), (2198), (2206), (2214)
  • add
  • aggregate (2188)
  • neighbor (2189)
  • no-receive (2190)
  • receive (2191)
  • send (2192)
  • change
  • change originate (2194)
  • change receive (2196)
  • change send (2197)
  • delete
  • aggregate (2199)
  • neighbor (2200)
  • no (2201)
  • originate (2202)
  • receive (2204)
  • send (2205)
  • disable
  • BGP6 speaker (2207)
  • classless-bgp (2208)
  • neighbor (2209)
  • enable (2210)
  • BGP6 speaker (2211)
  • compare-med-from-diff-AS (2212)
  • neighbor (2213)
  • list
  • aggregate (2215)
  • all (2216)
  • BGP6 speaker (2217)
  • neighbor (2218)
  • no (2219)
  • originate (2220)
  • receive (2222)
  • send (2223)
  • move (2224)
  • policy-to-neighbor (2195), (2203), (2221)
  • set (2225)
  • update (2226)
  • BGP6 dynamic reconfiguration (2247)
  • BGP6 monitoring commands
  • disable neighbor (2228)
  • dump routing tables (2229)
  • enable neighbor (2232)
  • list (2233)
  • neighbors (2235)
  • parameter (2236)
  • paths (2237)
  • ping6 (2238)
  • policy-list (2240)
  • reset neighbor (2242)
  • sizes (2243)
  • traceroute6 (2244)
  • Border Gateway Protocol for IPv6--see BGP6 (2248)
  • Border Node
  • COS mapping table (1589)
  • routing list (1588)
  • Branch Extender (1481), (1484), (1503), (1576), (1577) , (1578), (1579), (1580), (1581), (1582) , (1586), (1587)
  • C
  • cache
  • AppleTalk Phase 2 monitoring command (1669)
  • IPv6 monitoring command (2025)
  • change
  • IPv6 configuration command (1993)
  • IPv6 update packet filter configuration command (2011)
  • NDP configuration command (2067)
  • RIP6 configuration command (2158)
  • change metric
  • OSI/DECnet V monitoring command (1898)
  • change prefix-address (1881)
  • clear (1883)
  • PIM monitoring command (2114)
  • CLNP protocol (1809)
  • clnp-Stats
  • OSI/DECnet V monitoring command (1900)
  • command summary
  • BGP (2186), (2227)
  • DNA IV (1756)
  • configurable Held Alert Queue (1495), (1513), (1573)
  • configuration changes, affect on the router (1499)
  • configuration options (1500)
  • configuration requirements (1501)
  • configuring TN3270 under APPN (1551)
  • connection networks (1480)
  • COS (1517)
  • CoS mapping table (1507)
  • counters
  • AppleTalk Phase 2 monitoring command (1672)
  • IPv6 monitoring command (2027)
  • VINES monitoring command (1710)
  • D
  • DDDLU (1552)
  • Creating LUs at VTAM (1553)
  • Deleting LUs from VTAM (1554)
  • example VTAM PU definition (1556)
  • using Network Dispatcher with (1555)
  • deactivate link
  • APPN monitoring command (1608)
  • deactivate LU
  • TN3270E monitoring command (1633)
  • DECnet NCP
  • See NCP (1719)
  • delete
  • AppleTalk Phase 2 configuration command (1657)
  • APPN configuration command (1591)
  • IPv6 configuration command (1995)
  • IPv6 update packet filter configuration command (2013)
  • NDP configuration command (2069)
  • OSI configuration command (1885)
  • PIM configuration command (2098)
  • RIP6 configuration command (2160)
  • VINES configuration command (1695)
  • destination devices (1961)
  • dhcpv6-relay
  • NDP monitoring command (2083)
  • Dial on Demand (1536)
  • APPN using (1535)
  • Digital Network Architecture (DNA) phase IV (1718)
  • disable
  • AppleTalk Phase 2 configuration command (1659)
  • APPN configuration command (1569)
  • IPv6 configuration command (1997)
  • NDP configuration command (2071)
  • OSI configuration command (1887)
  • PIM configuration command (2100)
  • RIP6 configuration command (2162)
  • VINES configuration command (1696)
  • DLUR (1477), (1478), (1510), (1511), (1524)
  • DLUR retry algorithm (1525)
  • DNA IV
  • access control
  • configuring (1744)
  • exclusive (1746)
  • inclusive (1745)
  • managing traffic (1743)
  • addressing
  • 802.5 Token (1729)
  • description (1727)
  • Ethernet data link (1728)
  • X.25 data link (1732)
  • area routers
  • description (1737)
  • level 1 (1738)
  • level 2 (1739)
  • area routing filters (1747)
  • area support of (1721)
  • blending domains (1748)
  • configuration
  • for X.25 (1751)
  • configuring over ATM LAN Emulation (1731)
  • designated router for (1735)
  • LAT protocol (1724)
  • MOP support of (1722)
  • Network Control Program (NCP) (1741)
  • See NCP (1720)
  • routing (1733), (1734)
  • routing parameters (1740)
  • routing tables (1736)
  • special considerations and limitations (1725)
  • terminology and concepts (1726)
  • DNA IV configuration commands
  • define
  • circuit (1759)
  • executor (1761)
  • module access (1763)
  • module routing (1765)
  • node (1767)
  • help (1757)
  • purge
  • module access (1771)
  • module routing (1773)
  • show
  • area (1779)
  • node (1781)
  • show/list
  • circuit (1785)
  • executor (1787)
  • module access (1789)
  • module routing (1791)
  • zero
  • circuit (1797)
  • executor (1799)
  • module access (1795), (1801)
  • DNA IV monitoring commands
  • define
  • circuit (1760)
  • executor (1762)
  • module access (1764)
  • module routing (1766)
  • node (1768)
  • help (1758)
  • purge
  • module access (1772)
  • module routing (1774)
  • show
  • area (1780)
  • node (1782)
  • show/list
  • circuit (1786)
  • executor (1788)
  • module access (1790)
  • routing (1792)
  • zero
  • circuit (1798)
  • executor (1800)
  • module access (1802)
  • module_access (1796)
  • DNA V
  • networks (1749)
  • X.25 configuration
  • Count 2 (1750)
  • DNAV-info
  • OSI/DECnet V monitoring command (1904)
  • dump
  • AppleTalk Phase 2 monitoring command (1674)
  • APPN monitoring command (1610)
  • IPv6 monitoring command (2029)
  • NDP monitoring command (2085)
  • PIM monitoring command (2112)
  • RIP6 monitoring command (2174)
  • VINES (1712)
  • dump routing tables
  • BGP6 monitoring command (2230)
  • dynamic reconfiguration
  • APPN (1636)
  • BGP6 (2246)
  • IPv6 (2058)
  • MFC (2146)
  • MFC for IPv6 (2149)
  • NDP6 (2090)
  • NHRP server (1981)
  • PIM (2141)
  • PIM for IPv6 (2144)
  • RIP6 (2183)
  • E
  • enable
  • AppleTalk Phase 2 configuration command (1661)
  • APPN configuration command (1568)
  • IPv6 configuration command (1999)
  • NDP configuration command (2073)
  • OSI configuration command (1889)
  • PIM configuration command (2102)
  • RIP6 configuration command (2164)
  • VINES configuration command (1699)
  • Enterprise Extender Support for HPR over IP (1497)
  • es-adjacencies
  • OSI/DECnet V monitoring command (1906)
  • ES-IS protocol (1807)
  • description (1870)
  • hello message (1871)
  • es-is-stats
  • OSI/DECnet V monitoring command (1908)
  • exclude lists (1957)
  • exit (1652)
  • console command (1653)
  • VINES monitoring command (1716)
  • Extended Border Node (1482), (1485)
  • configuring (1504)
  • CoS mapping table (1508)
  • network requirements (1483)
  • routing list (1506)
  • extensions
  • IBM vendor-private extensions. (1965)
  • path information extensions (1962)
  • F
  • features
  • IP version 6 (IPv6) (1983)
  • focal point (1489), (1512)
  • G
  • getting help (1650)
  • H
  • help
  • console command (1651)
  • HIDLU (1557)
  • HPR (1476), (1509)
  • I
  • IBM-specific extensions
  • NHRP (1964)
  • implementation on the router (1474)
  • implicit focal point (1496), (1585)
  • interface
  • AppleTalk Phase 2 monitoring command (1676)
  • IPv6 monitoring command (2031)
  • PIM monitoring command (2116)
  • intermediate session data, collecting (1523)
  • internal
  • IPv6 monitoring command (2033)
  • IP
  • packet size (2263)
  • IPv6
  • configuring (1986)
  • overview (1985)
  • using (1984)
  • ipv6 command (1988)
  • IPv6 configuration commands
  • add (1990)
  • change (1992)
  • delete (1994)
  • disable (1996)
  • enable (1998)
  • list (2000)
  • move (2002)
  • set (2004)
  • summary (1989)
  • update (2006)
  • IPv6 dynamic reconfiguration (2059)
  • IPv6 monitoring commands
  • access-control (2022)
  • accessing (2018)
  • cache (2024)
  • counters (2026)
  • dump (2028)
  • interface (2030)
  • internal (2032)
  • mcast (2034)
  • mld (2036)
  • packet-filter (2048)
  • path-mtu (2050)
  • ping6 (2052)
  • reset (2038)
  • route (2040)
  • sizes (2042)
  • sniffer (2044)
  • static (2046)
  • summary of (2020)
  • traceroute6 (2054)
  • tunnels (2056)
  • IPv6 update packet filter configuration commands
  • add (2008)
  • change (2010)
  • delete (2012)
  • list (2016)
  • move (2014)
  • is-adjacencies
  • OSI/DECnet V monitoring command (1910)
  • IS-IS messages
  • IS to IS hello (IIH) messages (1830)
  • point-to-point (1836)
  • IS-IS protocol
  • description (1824)
  • IS to IS Hello (IIH) messages
  • IS to IS hello (IIH) messages
  • L1 (1833)
  • L2 (1835)
  • IS-IS areas (1825)
  • IS-IS domain (1828)
  • overview (1808)
  • is-is-stats
  • OSI/DECnet V monitoring command (1912)
  • ISDN Permanent Circuit
  • APPN using (1533)
  • ISDN permanent connection (1534)
  • J
  • join
  • PIM monitoring command (2118)
  • L
  • l1-routes
  • OSI/DECnet V monitoring command (1914)
  • l1-Summary
  • OSI/DECnet V monitoring command (1918)
  • l1-Update
  • OSI/DECnet V monitoring command (1922)
  • l2-Routes
  • OSI/DECnet V monitoring command (1916)
  • l2-Summary
  • OSI/DECnet V monitoring command (1920)
  • l2-Update
  • OSI/DECnet V monitoring command (1924)
  • lane shortcut interface (LSI)
  • NHRP (1954)
  • leave
  • PIM monitoring command (2120)
  • link level parameter lists (1530)
  • list
  • AppleTalk Phase 2 configuration command (1663)
  • APPN configuration command (1593)
  • APPN monitoring command (1612)
  • IPv6 configuration command (2001)
  • IPv6 update packet filter configuration command (2017)
  • NDP configuration command (2075)
  • NDP monitoring command (2087)
  • OSI configuration command (1891)
  • PIM configuration command (2104)
  • RIP6 configuration command (2166)
  • RIP6 monitoring command (2176)
  • TN3270E monitoring command (1635)
  • VINES configuration command (1702)
  • Local Area Terminal (LAT) protocol (1723)
  • log
  • APPN monitoring command (1614)
  • LSI (1955) See also lane shortcut interface (LSI)
  • LU parameter list (1531)
  • M
  • managing network nodes (1487)
  • managing the router network node (1486)
  • mcache
  • PIM monitoring command (2122)
  • mcast
  • IPv6 monitoring command (2035)
  • memory
  • APPN monitoring command (1616)
  • message units, supported, APPN-related alerts
  • MFC dynamic reconfiguration (2147)
  • MFC for IPv6 dynamic reconfiguration (2150)
  • mgroups
  • PIM monitoring command (2124)
  • mld
  • IPv6 monitoring command (2037)
  • monitoring
  • APPN (1599)
  • IPv6 monitoring commands (2021)
  • NDP monitoring commands (2081)
  • PIM monitoring commands (2110)
  • RIP6 monitoring commands (2172)
  • move
  • IPv6 configuration command (2003)
  • IPv6 update packet filter configuration command (2015)
  • mstats
  • PIM monitoring command (2126)
  • Multicast Forwarding Cache- -see MFC (2148)
  • N
  • NCP
  • description of (1742)
  • NCP configuration commands
  • purge (1770)
  • set (1776)
  • show (1778)
  • show circuit (1784)
  • summary of (1752)
  • zero (1794)
  • NCP monitoring commands
  • purge (1769)
  • set (1775)
  • show (1777)
  • show circuit (1783)
  • summary of (1753)
  • zero (1793)
  • NDP
  • configuring (2060)
  • NDP command (2062)
  • NDP configuration commands
  • add (2064)
  • change (2066)
  • delete (2068)
  • disable (2070)
  • enable (2072)
  • list (2074)
  • set (2076)
  • summary (2063)
  • NDP monitoring commands
  • accessing (2078)
  • dhcpv6-relay (2082)
  • dump (2084)
  • list (2086)
  • ping6 (2088)
  • summary of (2080)
  • NDP6 dynamic reconfiguration (2091)
  • neighbor
  • PIM monitoring command (2128)
  • neighbor discovery protocol for IPv6--see NDP6 (2092)
  • Network Control Protocols (NCP)
  • for PPP interfaces
  • AppleTalk Control Protocol (1645)
  • Next Hop Resolution Protocol See also NHRP
  • overview (1940)
  • next-hop routers (1959)
  • NHRP (1937)
  • benefits (1941)
  • destination devices (1960)
  • examples
  • classic IP environment (1943)
  • classic IP environment with non-NHRP device (1944)
  • Egress Router (1948)
  • LAN emulation (1945)
  • LAN switches (1946)
  • mixed classical IP and ELAN (1947)
  • exclude lists (1956)
  • implementation (1949)
  • disallowed router-to-router shortcuts (1966)
  • IBM-specific extensions (1963)
  • LANE shortcuts (1953)
  • limitations (1942)
  • next-hop routers (1958)
  • virtual network interface (VNI) (1950)
  • NHRP configuration commands (1939)
  • accessing (1968)
  • add (1974)
  • advanced (1972)
  • change (1976)
  • delete (1975)
  • disable (1971)
  • enable (1970)
  • list (1973), (1977)
  • set (1978)
  • summary (1969)
  • NHRP interfaces
  • configuring (1938)
  • monitoring (1967)
  • NHRP monitoring commands
  • accessing (1979)
  • list of (1980)
  • NHRP server dynamic reconfiguration (1982)
  • node level parameter lists (1532)
  • node tuning (1518)
  • node types (1473)
  • O
  • Open System Interconnection (OSI)
  • address prefix encoding (1859), (1860), (1862), (1864), (1866)
  • attached L2 IS routers (1851)
  • authentication passwords (1868)
  • designated IS (1839)
  • domain specific part (DSP) (1815)
  • end system (ES) (1803)
  • end system hello messages (1872)
  • ES-IS protocol (1869)
  • external routing (1858)
  • initial domain part (IDP) (1813)
  • description (1814), (1816)
  • intermediate system (IS) (1805)
  • internal routing (1857)
  • IS hello messages (1873)
  • IS to IS hello (IIH) messages (1831), (1837)
  • IS-IS addressing format (1817)
  • address format (1822)
  • AFI (1863)
  • area address (1819)
  • default address prefixes (1867)
  • fixed length IDI (1861)
  • non-pseudonode (1844), (1848)
  • point-to-point (1838)
  • pseudonode (1846), (1850)
  • selector (1821)
  • system ID (1820)
  • variable length IDI (1865)
  • IS-IS areas (1826)
  • IS-IS domain (1827)
  • L1 IIH message (1832)
  • L1 link state updates (1843), (1845)
  • L1 routing (1854)
  • L2 IIH messages (1834)
  • L2 link state updates (1847), (1849)
  • L2 routing (1855)
  • link state databases (1841)
  • link state updates (1842)
  • multicast addresses (1823)
  • network address structure (1812)
  • network addresses (1811)
  • Network Entity Title (NET) (1818)
  • network protocol data units (NPDU) (1804)
  • NSAP addressing (1810)
  • protocols running under (1806)
  • pseudonode (1840)
  • routing metric (1856)
  • routing tables (1853)
  • synonymous areas (1829)
  • unattached L2 IS routers (1852)
  • optional features (1475)
  • OSI
  • configuring (1874)
  • X.25 over OSI (1879)
  • OSI configuration commands
  • add (1877)
  • change prefix address (1880)
  • clear (1882)
  • delete (1884)
  • disable (1886)
  • enable (1888)
  • list (1890)
  • set (1892)
  • summary of (1876)
  • OSI/DECnet V
  • monitoring (1875)
  • OSI/DECnet V monitoring commands
  • addresses (1895)
  • change metric (1897)
  • clnp-stats (1899)
  • designated-router (1901)
  • DNAV-info (1903)
  • es-adjacencies (1905)
  • es-is-stats (1907)
  • is-adjacencies (1909)
  • is-is-stats (1911)
  • l1-routes (1913)
  • l1-summary (1917)
  • l1-update (1921)
  • l2-routes (1915)
  • l2-summary (1919)
  • l2-update (1923)
  • OSI/DECnet V monitoring command (1902)
  • ping-1139 (1925)
  • route (1927)
  • send (echo packet) (1929)
  • subnets (1931)
  • summary of (1894)
  • toggle (alias/no alias) (1933)
  • traceroute (1935)
  • P
  • packet size (2261)
  • packet-filter
  • IPv6 monitoring command (2049)
  • path-mtu
  • IPv6 monitoring command (2051)
  • PIM
  • pim
  • configuring (2093)
  • PIM monitoring command (2130)
  • PIM command (2095)
  • PIM configuration commands
  • delete (2097)
  • disable (2099)
  • enable (2101)
  • list (2103)
  • set (2105)
  • summary (2096)
  • PIM dynamic reconfiguration (2142)
  • PIM for IPv6 dynamic reconfiguration (2145)
  • PIM monitoring commands
  • accessing (2107)
  • clear (2113)
  • dump (2111)
  • interface (2115)
  • join (2117)
  • leave (2119)
  • mcache (2121)
  • mgroups (2123)
  • mstats (2125)
  • neighbor (2127)
  • pim (2129)
  • ping (2133)
  • reset (2135)
  • summary of (2109)
  • summary pim (2131)
  • traceroute (2137)
  • variables (2139)
  • ping
  • PIM monitoring command (2134)
  • ping-1139
  • OSI/DECnet V monitoring command (1926)
  • ping6
  • BGP6 monitoring command (2239)
  • IPv6 monitoring command (2053)
  • NDP monitoring command (2089)
  • RIP6 monitoring command (2178)
  • Point-to-Point Protocol (PPP)
  • AppleTalk Control Protocol (1644)
  • policy-list
  • BGP6 monitoring command (2241)
  • port level parameter lists (1529)
  • port types supported (1498)
  • Protocol Independent Multicast Routing Protocol--see PIM (2143)
  • Protocols
  • protocols
  • BGP (2251)
  • comparison table (2249)
  • Digital Network Architecture (DNA) Phase IV (1717)
  • FTP (2252)
  • ICMP (2254)
  • IP (2255)
  • IPX (2256)
  • key to (2250)
  • RIP (2257)
  • SGMP (2258)
  • SNMP (2259)
  • TCP (2260)
  • TFTP (2253)
  • R
  • reset
  • IPv6 monitoring command (2039)
  • PIM monitoring command (2136)
  • RIP6 monitoring command (2180)
  • restart
  • APPN monitoring command (1624)
  • restrictions (1526)
  • RIP6
  • configuring (2151)
  • RIP6 command (2153)
  • RIP6 configuration commands
  • add (2155)
  • change (2157)
  • delete (2159)
  • disable (2161)
  • enable (2163)
  • list (2165)
  • set (2167)
  • summary (2154)
  • RIP6 dynamic reconfiguration (2184)
  • RIP6 monitoring commands
  • accessing (2169)
  • dump (2173)
  • list (2175)
  • ping6 (2177)
  • reset (2179)
  • summary of (2171)
  • traceroute6 (2181)
  • route
  • IPv6 monitoring command (2041)
  • OSI/DECnet V monitoring command (1928)
  • routing information protocol for IPv6--see RIP6 (2185)
  • routing list (1505)
  • routing tables
  • BGP6 dump command (2231)
  • rtp status
  • APPN monitoring command (1618)
  • rtp switchpath
  • APPN monitoring command (1620)
  • rtp test
  • APPN monitoring command (1622)
  • RU size (1519), (1572)
  • S
  • SDLC (1544)
  • APPN using (1543)
  • Seed router
  • AppleTalk Phase 2 (1642), (1648)
  • send (Echo Packet)
  • OSI/DECnet V monitoring command (1930)
  • set
  • AppleTalk Phase 2 configuration command (1665)
  • APPN configuration command (1571)
  • IPv6 configuration command (2005)
  • NDP configuration command (2077)
  • OSI configuration command (1893)
  • PIM configuration command (2106)
  • RIP6 configuration command (2168)
  • VINES configuration command (1704)
  • sizes
  • IPv6 monitoring command (2043)
  • sniffer
  • IPv6 monitoring command (2045)
  • SNMP managed node, using the router as (1493)
  • sphere of control (1490)
  • static
  • IPv6 monitoring command (2047)
  • stop
  • APPN monitoring command (1626)
  • subnets
  • OSI/DECnet V monitoring command (1932)
  • summary of
  • NCP configuration commands (1754)
  • NCP monitoring commands (1755)
  • summary pim
  • PIM monitoring command (2132)
  • supported message units (1491)
  • supported message units, APPN-related alerts (1492)
  • T
  • talk
  • OPCON command (1601), (1987), (2019), (2061), (2079) , (2094), (2108), (2152), (2170)
  • TG characteristics (1516)
  • the router as entry point (1488)
  • TN3270 (1545)
  • tn3270E server configuration (1548)
  • what is (1546)
  • tn3270e
  • APPN monitoring command (1628), (1630)
  • TN3270E monitoring commands
  • deactivate LU (1632)
  • list (1634)
  • TN3270E Server
  • TN3270E server (1547)
  • client IP Address to LU/Pool Mapping (1559)
  • client to LU mapping (1558)
  • configuration commands (1596)
  • Configuration parameters (1597)
  • Configuring, using DLUR (1564)
  • Configuring, using local node identifier (1565)
  • example configurations (1563)
  • load balancing among multiple PUs (1562)
  • monitoring commands (1631)
  • port and IP address mapping (1561)
  • Server TCP port to pool mapping (1560)
  • tn3270E server configuration (1549)
  • toggle (Alias/No Alias)
  • OSI/DECnet V monitoring command (1934)
  • Token-Ring 4/16
  • packet size (2262)
  • topology Database Garbage Collection (1494)
  • traceroute
  • OSI/DECnet V monitoring command (1936)
  • PIM monitoring command (2138)
  • traceroute6
  • BGP6 monitoring command (2245)
  • IPv6 monitoring command (2055)
  • RIP6 monitoring command (2182)
  • traces (1520)
  • tracing (1521)
  • transmission group characteristics, setting (1515)
  • transporting data (1527)
  • tunnels
  • IPv6 monitoring command (2057)
  • U
  • update
  • IPv6 configuration command (2007)
  • using the router as SNMP managed node
  • V
  • V.25 bis (1540)
  • APPN using (1539)
  • V.34
  • APPN using (1541)
  • variables
  • PIM monitoring command (2140)
  • VINES (1703)
  • Address Resolution Protocol (ARP) (1690)
  • basic configuration procedures (1691)
  • client nodes (1680)
  • configuring (1677)
  • disabling an interface (1697)
  • disabling globally (1698)
  • enabling an interface (1700)
  • enabling globally (1701)
  • monitoring (1692)
  • monitoring commands (1708)
  • neighbor tables (1685)
  • dumping (1713)
  • setting size (1707)
  • network layer protocols (1681)
  • Address Resolution Protocol (ARP) (1688)
  • Internet Control Protocol (ICP) (1687)
  • Routing Update Protocol (RTP) (1683)
  • VINES IP (1682)
  • overview (1678)
  • routing tables (1684)
  • dumping (1714)
  • setting size (1706)
  • RTP implementation (1686)
  • service nodes (1679)
  • setting number of client nodes (1705)
  • VINES configuration commands (1693)
  • VINES monitoring commands
  • counters (1709)
  • dump (1711)
  • exit (1715)
  • virtual network interface (VNI)
  • NHRP (1951)
  • VNI (1952) See also virtual network interface (VNI)
  • VTAM DSPU (1479)
  • W
  • WAN reroute (1537)
  • WAN restoral (1538)

  • [ Top of Page | Previous Page | Table of Contents | Index ]